Seip MIDI Hand Transmitter SKR433-1 & HomeLink

HomeLink Information
	MIDI Transmitter SKR433-1 Code B43A023002-1 433MHz, AM, rolling Code


What is HomeLink?	A car integrated remote control. The HomeLink Module must be set up for the remote control used, e.g. it "learns" the code from an original hand transmitter. The HomeLink Module copies the algorythm of our Rolling Code System and becomes an additional hand transmitter generating its own code when programmed successfully.

Compatibility	The hand transmitter is compatible with HomeLink Revision 6 or higher, earlier versions are not supported.

Programming

First Step	The transmitter needs to be registered with the cars HomeLink Module. Please follow the programming procedure as to the HomeLink installation guide (it can be obtained from www.eurohomelink.com). TIP: the quickest result is usually achieved with a distance of approx. 15cm between the HomeLink Module and the transmitter. If the distance is too short, the transmitter might not be recognized at all by the HomeLink Module. If, however, you should experience difficulties with the programming, then please try different distances between 0 and 30cm.

Second Step	Once the HomeLink Module was programmed, it must be registered with the operator/receiver. Please follow the instructions of your operator/receiver regarding the procedure of how to programm additional hand transmitters: -> to our download pages